Works , used on 13 chrysler t&c touring , ordered 2 of these to replace both Y , one was leaking at fitting and proactively replaced other. CAUTION ⚠️!!! Do not mix hoat and oat antifreeze and do not go by color!!! Or trust anyone, I asked 3 dodge dealership shop techs and got 2 that said oat and 1 said hoat, mopar hoat used to be pink and is now purple and oat used to be purple and is now pink or some crap... I just flushed changed mine out completely, I drained radiator then filled with water drained fill, ?, run with Heater on high till engine is hot, let cool, drain fill with flush product, then run as instructed, drain ,fill water run till hot, let cool, drain shake hoses squeeze to get as much water as possible out.... then close drain plug,lol. Fill it up with desired coolant get the pre mix don't mess with it , using concentrated coolant is not good as water quality and type and degrade the quality, and never ever add tap water, and always all 50/50 pre mix if low. After this every 5 years or 150k simple with engine warm drain the radiator, close plug and refill, that's it ?. Note when flushing always keep an eye on your temp if it goes over half for more than 1 min turn off let cool check for leaks and top off and run again, no big deal and honestly hasn't happened to me unless I blew air thru lines or have leak... good luck and do not be afraid this is easy just use your brain and if it feel hot it is hot ?