ApplicationThis product can be used to repair dents on steel car bodies. It is suitable for garages, or personal use.How to Use1. Move the heating head around the dent and check the changes. gradually move into the dent center.2. Press the button at each heating spot for1-2 times.3. After the previous processes are done, a dent will be reduced less than the heating head, put the heating head above the dent and heat again, but using less power or heating time.4. Put the heating head near the dent and heat again several times.SpecificationMaterial: MetalInput Power: 110V-120VInput Frequency: 50/60HzOutput Power: 1.38KWOutput Frequency: 150KHzPower Output Cable: 160cm/299.21inchProduct Size: 13.5*25*7.5cm/5.3*19.84*2.95inchCase Size: 31*32.5*16 cm/12.2*12.8*6.3inchPackage Size: 32*32*16cm/12.6*12.66.3inchGross Weight: 4kg/8.82lbsPackage Included1 x Induction Heater1 x Cable1 x Power Cord5 x Candles1 x Hammer1 x Suitcase1 x English ManualAll Accessories for UseNotes1. To avoid causing damage to surface painting, do not apply heating on a single dent for a long time.2. After 3-5 times heating, use a wet towel to reduce surface temperature.3. Do not let the heating head touch the surface painting, leave a gap of 3-5mm.4. During the heating process, the painting surface becomes soft, applying pressure on the surface will increase the dent.